Gigafiction IT Solutions

Tri-colour silk gradient in blue, green & purple | Adjustable gloss finish | Flexible and reliable printing | Compatible with 1.75 mm printers | Ideal for decorative prints and artwork

The Anycubic PLA Silk Tri-colour Filament in Blue/Green/Purple is designed for makers who want their prints to go beyond the ordinary. This 1 kg spool combines three complementary colours — blue, green, and purple — into a single filament that produces natural gradient transitions and a lustrous, silk-like surface finish as the print builds layer by layer. By adjusting nozzle temperature and print speed within the recommended range of 210–240 °C and 50–250 mm/s, you can dial the surface sheen from a subtle satin to a high-gloss finish, giving you direct control over how the final model looks. The filament has passed extensive bending and tearing tests, delivering the flexibility needed for smooth, uninterrupted runs — making it a reliable choice for decorative parts, fan art, and artistic models. Compatible with any 1.75 mm filament printer using a 0.4 mm or larger nozzle, it slots into your existing workflow without fuss.

Features

• Tri-colour gradient (blue, green, purple) produces rich, layered colour transitions across the printed surface
• Silk-like luster shifts with viewing angle, giving finished models a premium, eye-catching finish
• Controllable gloss — raise nozzle temperature or lower print speed to increase surface smoothness and shine
• Printing temperature range of 210–240 °C and recommended speed of 50–250 mm/s suits a wide range of FDM printers
• Compatible with any 1.75 mm filament printer fitted with a 0.4 mm or larger nozzle
• Proven flexibility through extensive bending and tearing tests for reliable, uninterrupted printing
• Complies with RoHS, REACH, and SDS certifications

Specifications

• Colour: Blue Green Purple (#003594,#006F44,#452B6F)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 164 ℃
• Vicat Softening Temperature: 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young’s Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What’s in the Box

• Anycubic PLA Silk Tri-colour Filament 1kg – Blue/Green/Purple x1