Gigafiction IT Solutions

Dual-colour silk luster in one spool | Smooth gradient finish straight off the printer | Compatible with all 1.75 mm FDM printers | Adjustable gloss via nozzle temperature and speed | Designed for decorative prints and artistic models

The Anycubic PLA Silk Dual Filament in Black/Red is designed for makers who want their prints to stand out with a rich, layered visual effect without any post-processing. The dual-colour silk formula blends black and red into a seamless gradient that shifts and catches the light as the model rotates, giving finished pieces a premium, almost metallic sheen. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity for a high-gloss, silky surface, while cooler, faster settings yield a softer lustre. The filament is compatible with any 1.75 mm FDM printer and works at a printing temperature of 210–240 °C with a heated bed set to 55–56 °C and a recommended print speed of 50–250 mm/s. Dry the spool at 55–65 °C for 6–8 hours before use to ensure clean, consistent extrusion. Ideal for decorative parts, fan art, and artistic models where visual impact matters.

Features

• Dual-colour silk PLA combines Black (#212721) and Red (#D22630) in a single strand for eye-catching gradient prints
• Silk-like surface luster shifts across the colour spectrum as the model is rotated, adding depth and a premium finish
• Controllable gloss — adjust nozzle temperature and print speed to dial in high-gloss or softer lustre results
• Compatible with all 1.75 mm FDM printers; no specialist hardware required
• Supports intelligent identification when used with compatible Anycubic ACE Pro systems for automatic print-parameter recognition
• Certified to RoHS, REACH, and SDS standards
• Recommended for decorative parts, fandom models, and artistic prints

Specifications

• Colour: Black Red (#212721,#D22630)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 164 ℃
• Vicat Softening Temperature: 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young’s Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What’s in the Box

• Anycubic PLA Silk Dual Filament 1kg – Black/Red x1